CONSTRUCTION: Engineered format with a Uniclic® HDF locking core

DIMENSIONS: 5" wide, 36-1/4" long, 7/16" thick / 2.5mm wearlayer

HARDNESS: Over 3000 on the Janka Hardness Scale

MILLING: 4-sided micro-bevel / Uniclic® locking system

FINISH: 8-step Treffert® aluminum oxide finish

ADHESIVES: Dynea Prefere Adhesives. No added Urea Formaldehyde

INSTALLATION: Float or Glue installation / Radiant floor heating compatible
Below, on, or above grade

ENVIRONMENT: E0 & CARB II Compliant / Qualifies for LEED® Credits IEQ4.4 and MR6

COLOR VARIANCE: Low


CONSTRUCTION: Engineered with multi-ply, Poplar core and backing

DIMENSIONS: 5" wide, 72-3/4" long, 1/2" thick. 19.92 sqft/box. 2.3mm wear layer

HARDNESS: Over 3000 on the Janka Hardness Scale

MILLING: 4-sided distressed bevel / tongue & groove

FINISH: 8-step Treffert® aluminum oxide finish / hand scraped + wire brushed

ADHESIVES: Dynea Prefere Adhesives. No added Urea Formaldehyde

INSTALLATION: Nail, Float, Glue - Radiant floor heating compatible
Below, on, or above grade

ENVIRONMENT: E0 & CARB II Compliant / Qualifies for LEED® Credits IEQ4.4 and MR6

COLOR VARIANCE: Low

  

 

 

CONSTRUCTION: Solid format with 100% bamboo from top to bottom

DIMENSIONS: 3-3/4" wide, 72-3/4" long, 1/2" thick

HARDNESS: Over 3000 on the Janka Hardness Scale

MILLING: 4-sided micro-bevel / tongue & groove

FINISH: 8-step Treffert® aluminum oxide finish / wire brushed

ADHESIVES: Dynea Prefere Adhesives. No added Urea Formaldehyde

INSTALLATION: Glue
On or above grade

ENVIRONMENT: 100% FSC® Certified* / E0 and CARB II compliant / Qualifies for LEED® Credits IEQ4.4, MR6, and MR7

COLOR VARIANCE: Low

 

   


CONSTRUCTION: Solid format with 100% bamboo from top to bottom

DIMENSIONS: 3-3/4" wide, 75-5/8" long, 5/8" thick

HARDNESS: 1200 to 1400 on the Janka Hardness Scale

MILLING: 4-sided micro-bevel / tongue & groove (Unfinished styles have square edges)

FINISH: 8-step Treffert® aluminum oxide finish / Dynea Prefere Adhesives. No added Urea Formaldehyde

ADHESIVES: Dynea Prefere Adhesives. No added Urea Formaldehyde

INSTALLATION: Nail or Glue / Radiant floor heating compatible
On or above grade 

ENVIRONMENT: E-0 and CARB Phase II Compliant / Qualifies for LEED® Credits / FSC® Certified (C020547)

COLOR VARIANCE: High

 

Warranty

 

 

Finish: A high quality finish is a durable finish that won't chip or flake off with repeated use. 
8-step Treffert© UV-cured aluminum-oxide and acrylic urethane layer which makes for the most durable finish available and is warranted for 50 years.

Environment: E0 and CARB Phase I & II Compliant, and qualify for multiple LEED® credits.

Hardness: Onyx has been specifically manufactured to be an extremely dense and durable floor and Janka Hardness testing has confirmed that this goal have been achieved . Onyx tests at over 3000 on the ASTM D1037 Janka ball test...almost three times harder than standard oak.